3M™ Thermal Transfer Polyester Label Material 7816

3M™ Thermal Transfer Polyester Label Materials 7816 and 7816FL are gloss radiant white polyester label stocks that offer. These label products utilize 3M™ Adhesive 310 which is a firm adhesive which resists oozing and provides high strength on a variety of surfaces including high surface energy (HSE) plastics and metals.

• Topcoated for thermal transfer printing. Resin ribbons are recommended for optimum durability. The topcoat also provides improved ink anchorage for traditional forms of press printing.
• 3M label material 7816 55# densified kraft liner assures consistent die cutting.
• UL recognized (File MH16411) and CSA accepted (File 99316). See the UL and CSA listings for details.

For maximum bond strength, the surface should be clean and dry. Typical cleaning solvents are heptane and isopropyl alcohol.*

For best bonding conditions, application surface should be at room temperature or higher. Low temperature surfaces, below 50°F (10°C), can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure.

*When using solvents, read and follow the manufacturer's precautions and directions for use.

• Barcode labels and rating plates.
• Property identification and asset labeling.
• Warning, instruction, and service labels for durable goods.
• Nameplates and durable goods.

Thermal Transfer Printing
Printer: UL no longer requires evaluation and listing of specific printers.

Ink Ribbon/UL Recognized Components
Advent: 301 Black; 303 Black; 501 Black; 501 Red; 501 Blue; 501 Green
Armor: AXR-7; AXR-7+; AXR-600
Astromed: R5
CP: 5440 Red; 5640 Blue; 5940 Black
Dasco: DR-74; DR-84
Great Ribbon: SDR
Iimak: SH-36; SP-330; PrimeMark
Intermec: 053258-2; 054048-4
Japan Pulp and Paper: JP Resin 1; JP Resin 2 Blue; JP Resin 2 Red (suitable for indoor use only); JP Resin 2 Green (suitable for indoor use only)
Kurz: K500; K501
Markem: 716 (suitable for indoor use only)
Mid City Columbia: CGL-80; CGL-80HE
NCR: Matrix Resin; Matrix; PaceSetter; Promark II; Ultra V
Pelikan: T016
Ricoh: B110A; B110C; B110CX
Sato: Premier 1
Sony: 4070; 4072; 4075; 4085; 5070; Signature Series Resin; Signature Series Wax
UBI: HR03; HR04
Zebra: 5095; 5099; 5100; 5175

Printing:
Facestock is topcoated for improved ink receptivity and is designed for thermal transfer printing. It is printable by all standard roll processing methods including flexography, hot stamp, letterpress, and screen printing. Refer to Graphic Ink Selection Guide or call 3M Customer Service at 1-800-223-7427 for additional information.

Die Cutting:
Rotary die cutting is recommended. Fanfolding of labels is not recommended. Small labels should be evaluated carefully. Winding tensions should be kept at a minimum to help prevent the adhesive from oozing.

Packaging:
Finished labels should be stored in plastic bags.

Store at room temperature conditions of 72°F (22°C) and 50% relative humidity.

If stored under proper conditions, product retains its performance and properties for two years from date of manufacture.

All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application.

Unless stated otherwise in 3M's product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M's and seller's sole obligation will be, at 3M's option, to replace the product or refund the purchase price.

Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.