Tartan™ Utility Filament Tape 8934

PRODUCT DESCRIPTION:

Tartan™ Utility Filament Tape 8934 is a glass filament reinforced tape for light duty strapping, bundling and reinforcing. It has a synthetic rubber resin adhesive with good adhesion to most fiberboard surfaces, and a variety of plastics and metal surfaces.

CONSTRUCTION:

Backing	Adhesive	Reinforcement	Backing Color
3M™ Scotchpro™ Film	Pressure sensitive synthetic rubber-resin	Glass Yarn	Clear

TYPICAL PHYSICAL PROPERTIES:

Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes.
ASTM Test Method
Adhesion to Steel:	60 oz./in. width (65 N/100 mm width)	D-3330
Tensile Strength:	100 lbs./in. width (1750 N/100 mm width)	D-3759
Elongation at Break:	3%	D-3759
Total Thickness:	4 mil (0.11 mm)	D-3652

FEATURES:

Abrasion and moisture resistant.
High tensile strength.
Allows printing and illustrations to be seen through the tape.
Good shear and initial adhesion.
Good aging.
Protection of filaments and adhesive to provide longer package life.
Less tape needed at lower cost for applications where high tensile strength is a main requirement.
Good holding under wide range of application conditions with minimum amount of tape.
Holds with minimum rub-down.
Boxes remain closed for long period of time.

AVAILABLE SIZES:

Standard Widths:	9 mm, 12 mm, 18 mm, 24 mm, 36 mm, 48 mm & 72 mm
Core Size (ID):	3 in.
Standard Lengths:	55 m

APPLICATION TECHNIQUES:

An extensive line of hand-held tape dispensers is available. Application of Tartan™ Utility Filament Tape 8934 is most easily accomplished at room temperature. At lower temperatures approaching 32°F (0°C), the adhesive becomes firm. Once applied, Tartan tape 8934 performs well throughout the normal temperature ranges typically encountered by packaged products in shipping and storage environments.

STORAGE CONDITIONS:

Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40 to 50% relative humidity are recommended. Rotate your stock.

FOR ADDITIONAL INFORMATION:

To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550 or visit www.3M.com/packaging. Address correspondence to: 3M Industrial Adhesives and Tapes Division, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55144-1000. Our fax number is 651-778-4244. In canada, phone: 1-800-364-3577. In Puerto Rico, phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00.

IMPORTANT NOTICE:

3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's application.

LIMITATION OF REMEDIES AND LIABILITY:

If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M'S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty, or strict liability.

877-239-0123