Vinyl Tapes

Vinyl & Electroplating Tapes

Vinyl and Electroplating tapes are OSHA-approved vinyl tapes comprised of a stabilized, plasticized PVC film that is coated with a non-corrosive rubber based pressure sensitive adhesive. They have excellent resistance to moisture, acids and alkalines, chemicals, oils, abrasion, and weathering. They are typically recommended for floor or aisle marking in conformance with OSHA requirements, but they may be used for almost any marking or color-coding application.

Thickness: 6 mils
Width: custom slit
Length: 36 and 60 yards

Electrical Tapes

Can-Do's "Ape Tape" electrical tape is value priced and constructed of a plasticized and stabilized soft PVC film. It is coated with a rubber-based adhesive on one side. The non-corrosive pressure sensitive adhesive requires no heat, moisture, or other preparation and results in an easily applied quality finished product. Can-Do also stocks a variety of high performance electrical tapes that meet various MIL and automotive specifications.

Colors: Black and many others
Thickness: 7 mils
Width: 3/4"
Length: 60 feet

Hazard Stripe Tapes

Hazard stripe tapes are used for marking floors, handrails, steps, hazardous areas, and for color-coding, bundling, and identification. These PVC tapes may have a glossy overlaminate for appearance and protective purposes. They are abrasion resistant and resistant to acids, alkalines, and oils.

Colors: Black/Yellow, Black/White, Red/White
Thickness: 5.5 mils
Width: custom slit
Length: 18 and 36 yards

Pipewrap Tapes

Pipewrap tapes are composed of a stabilized, plasticized, PVC film coated with a non-corrosive pressure sensitive adhesive. They are moisture resistant and anticorrosive. They have outstanding conformability and adhesion to metal and plastic.

Colors: Black and Yellow, both printed and un-printed.
Thickness: 10 mils
Width: custom slit
Length: 100 feet