• Overview
  • Applications
  • Technical Data
  • Warranty

3M 4492 Double Sided Polyethylene Foam Tape

Double Sided Foam Tape, 3M 4492

Double-Sided Polyethylene Foam Tape. Pressure-sensitive foam mounting tape with a highly aggressive synthetic rubber adhesive. 72 yard roll of D/C White PE Foam.

3M 4492 Features:

  • Black or white, 0.031 in. (0.8 mm) closed-cell polyethylene foam carrier
  • Offers an ultimate adhesion to a large variety of surfaces
  • Bonds to irregular surtaces due to it’s high conformability
  • Long term acrylic durability

 

Available Sizes for 3M 4492:

White, 1/2 in x 72 yd 1/32 in, 18 per case Bulk
White, 3/4 in x 72 yd 1/32 in, 12 per case Bulk
White, 1 in x 72 yd 1/32 in, 9 per case Bulk
White, 12 in x 72 yd 1/32 in, 1 per case
White, 2 in x 72 yd 1/32 in, 6 per case
White, 3/8 in x 72 yd 1/32 in, 24 per case Bulk
White, 1-1/2 in x 72 yd, 6 rolls per case
White, 48 in x 72 yd 1/32 in, 1 per case Bulk

Black, 1/2 in x 72 yd 1/32 in, 18 per case Bulk
Black, 3/4 in x 72 yd 1/32 in, 12 per case Bulk
Black, 1 in x 72 yd 1/32 in, 9 per case Bulk
Black, 48 in x 72 yd 1/32 in, 1 per case
Black, 2 in x 72 yd 1/32 in, 6 per case
Black, 48 in x 175 yd, 1 per case Bulk
Black, 25 in x 175 yd 1/32 in, 1 per case Bulk
Black, 1/4 in x 72 yd, 36 rolls per case
Black, 3/8 in x 72 yd, 24 rolls per case

We also offer Custom Slit Rolls of 3M 4492

 

Product: 4492

In Stock Item

Request Quote   Request A Sample

photo of 3m 4492 roll of Polyethylene Foam tape

Other Options…

Applications

APPLICATION DESCRIPTION:

Instead of mechanical fasteners such as screws, bolts and studs, 3M 4492 double coated polyethylene tape leaves no puncture holes. 3M 4492 double coated tape offers speed, strength and improved aesthetics to your mounting application. 4492 can be easily applied by hand or with a dispenser, with no special application equipment required. Immediate holding strength. Further improved upon the power of liquid adhesives.

APPLICATION NOTES:

• Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. • To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or water. Note: Be sure to follow the manufacturer’s precautions and directions for use when using cleaning solvents. • Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.

Request Quote   Request A Sample

Technical Data

BRAND: 3M

MATERIAL DESCRIPTION:

ADHESIVE TYPE:Pressure-Sensitive
CONSTRUCTION:Double Sided
RELEASE LINER MATERIAL:0.003 inch (0.08 mm) Tan Paper
RELEASE LINER THICKNESS:0.003 inch (0.08 mm)

TECHNICAL DATA:

ADHESIVE LAYER:Acrylic
ADHESIVE LAYER DESCRIPTION:Acrylic Adhesive
BACKING/CARRIER MATERIAL:Polypropylene Film
BACKING/ADHESIVE THICKNESS:N/A
ADHESION TO STEEL:8 lb/inch width (140 N/100mm)
TENSILE STRENGTH:60 lb./in.2 (415 kPa)
ELONGATION:N/A

DATA SHEET:

PDF download 3M 4492 Double Sided Polyethylene Foam Tape (PDF)

SHELF LIFE:

Typical shelf life is one (1) year from date of manufacture (DOM).

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote   Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.