- Technical Data
3M 465 Adhesive Transfer Tape
3M 465 with Adhesive 400
3M Adhesive Transfer Tape 465 is a 2.0 mil high tack acrylic adhesive 400 with 3.5 mil 60 lb densified kraft paper liner. 3M™ Adhesive Transfer Tapes 465 with 3M™ Adhesive 400 are ideal for bonding together a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics.
- 2 mil adhesive transfer tape with easy liner release for manual or hand applications. Fibered adhesive transfer tape.
- High tack, excellent adhesion to most paper stocks. Good low temperature performance and peel strength on many surfaces.
- General purpose adhesive transfer tapes for use in printing applications such as splicing, core starting, flexo, and laminating. High speed flying splices on most grades of paper.
1/8 inch minimum width
48 inch maximum width
Call for Custom Converting and Slitting
In Stock Item
Ideal for bonding together a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics. High speed flying splices and zero speed splices on most grades of paper.
APPLICATION NOTES:Application Techniques: • Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. • To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.* *Be sure to follow manufacturer’s safety precautions and directions for use when using solvents. • Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
Technical DataBRAND: 3M
|RELEASE LINER MATERIAL:||60# Unbleached Densified Kraft|
|ADHESIVE LAYER DESCRIPTION:||400 medium firm acrylic|
|THICKNESS:||0.002 in. (0.05 mm)|
|ADHESION TO STEEL:||25 oz./in. width (27 N/100 mm)|
Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.
The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.