• Overview
  • Applications
  • Technical Data
  • Warranty

Avery V-5720 Conspicuity Reflective Tape

Avery V-5720 Conspicuity Tape

Avery V-5720 Conspicuity Reflective Tape is the original red and white stripe reflective contour tape developed for North America to improve nighttime vehicle recognition. V-5720 is a highly durable single layer construction offering easy repositionable application. V-5720 may be ordered in the following colors: red/white pattern (6″ x 6″ & 11″ x 7″), solid red and solid white. It is available in the traditional 2″ wide rolls as well as strips and kiss cut nishes. It is now offered in 10-year durability for new vehicles, as well as 5-year durability for replacement applications!

Avery V-5720 Conspicuity Tape is a high high quality, durable, microprismatic retroreflective material with a pressure sensitive adhesive. The single layer construction does not require edge sealing. Designed for trucks, trailers, recycling and waste vehicles for easy nighttime recognition and increased safety.

Conspicuity reflective markings on trucks are increasing and making detection easy, giving drivers time to see a vehicle, react and avoid possible collision. Many accidents could have been avoided if the other driver had only been able to see the other vehicle and/or truck. The NHTSA study reported a 41 percent reduction in side and rear trailer impact when using conspicuity tape.

Applications:

  • Trucks and Trailers
  • Recreation Vehicles
  • Recycling and Waste Vehicles
  • Utility and Maintenance Vehicles
  • 3 to 4 times higher than required by specifications
  • Single layer and doesn’t require edge sealing
  • Long lasting bond

 

Product: Avery V-5720

In Stock Item

Request Quote   Request A Sample

Conspicuity Tape

Applications

APPLICATION: Safety

APPLICATION DESCRIPTION:

Regular cleaning is recommended to ensure maximum performance for vehicle identification day and night. Please check for any changes to local, state or Federal regulations that are relevant to Conspicuity Tape markings. For large trucks and trailers exemplary standards include section S5.7.1.4 from Standard No. 108 of 49 CFR Part 571. Per these requirements, conspicuity tape must be cut to allow a 75mm (about 3”) space from the lights and reflectors.

APPLICATION NOTES:

Surfaces to be bonded to should be dry, clean and free from oil and grease.

Request Quote   Request A Sample

Technical Data

BRAND: Avery Dennison

MATERIAL DESCRIPTION:

SIZE:50 yd
COLOR:Refer to Data Sheet
ADHESIVE TYPE:Pressure-Sensitive
CONSTRUCTION:Single Coated

TECHNICAL DATA:

ADHESIVE LAYER:Acrylic
ADHESIVE LAYER DESCRIPTION:Permanent Pressure Sensitive
BACKING/CARRIER MATERIAL:Film
TEMPERATURE OPERATING: -10°F to 175°F

DATA SHEET:

PDF download Avery V-5720 Conspicuity Reflective Tape (PDF)

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote   Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.