• Overview
  • Applications
  • Technical Data
  • Warranty

PROTEX 20s, Paper Protection

Protective Paper

Mask-Off PROTEX 20s Single-sided Paper with Natural Latex Adhesive

PROTEX 20s is a 20 mil latex saturated paper designed for applications where extra protection is needed, and high tack is required. Examples include: wing walk areas to eliminate damage from foot traffic, top areas of aircraft wings, leading edges, exterior skins during installation and fabrication, and interior protection on ceilings and overhead storage compartments.

PROTEX 20S has proven to be excellent in protecting graphite composite surfaces and tooling from impact damage that may result in possible interlayer fracturing. PROTEX 20S is also used for movie studio backdrops, cover-ups and painting of sets. It can withstand 60 lbs. of sandblasting pressure for decorative applications e.g. glass etching, and light sandblasting.

This product is not intended for fly-away applications.

Available Sizes:
36″ X 30 yd
Call for Custom Converting and Slitting.

Product: PROTEX 20s

In Stock Item

Request Quote   Request A Sample

PROTEX 20s paper protection tape

Applications

INDUSTRIES: Aerospace

APPLICATION: Surface Protection

APPLICATION DESCRIPTION:

Wing walk areas to eliminate damage from foot traffic, top areas of aircraft and on leading edges. Used for Tedlar ® interior protection in ceiling areas, overhead storage compartments and for exterior skin protection where heavy duty protection is required. Used to protect graphite composite surfaces from impact damage that could result in interlayer fracturing. PROTEX 20S may also be used for movie studio backdrops, cover-ups, and painting of sets. It can withstand 60 pounds of sandblasting pressure for decorative applications, i.e. glass etching and light blasting on wood.

APPLICATION NOTES:

Application surface: Pre-Mask

Request Quote   Request A Sample

Technical Data

BRAND: Mask-Off

MATERIAL DESCRIPTION:

ADHESIVE TYPE:Pressure-Sensitive
CONSTRUCTION:Single Coated
LINER:Flat

TECHNICAL DATA:

ADHESIVE LAYER:Rubber
ADHESIVE LAYER DESCRIPTION:Natural Latex
BACKING/CARRIER MATERIAL:Paper
THICKNESS:20 mil
ADHESION TO STEEL:oz/inch width 30-40 (-5/+7) (At time of manufacture) PSTC-1 (Modified)
TENSILE STRENGTH:lbs/inch, M.D. 25
ELONGATION:% M.D. 10 min
TEMPERATURE OPERATING:150° for 1 hour, No heat

DATA SHEET:

PDF download PROTEX 20s, Paper Protection (PDF)

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote   Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.