• Overview
  • Applications
  • Technical Data
  • Warranty

PROTEX 223-5ht, Protective Film

Protective Film

Mask-Off PROTEX 223-5ht film with high tack synthetic elastomer resin adhesive

PROTEX 223-5ht is a 5 mil polyester film coated with a very high tack pressure sensitive adhesive. Applied to aluminum, stainless steel or non-metallic floor panels around galley and lavatory areas on many types of aircraft to prevent water damage, oxidation or corrosion of the metal. This product is not intended for fly-away applications.

PROTEX 223-5HT is applied to one side of fiber impregnated aluminum honeycomb core material to hold in place on vacuum table for milling opposite side.

PROTEX 223-5HT has high tensile, tear and impact strength. It is inert in water, moisture resistant, and is unaffected by oils, greases and volatile aromatics. It retains these outstanding properties remaining flexible and tough from -80°F (-62 °C)  to 150°F (65.5°C).

 

Available Sizes:
48″ X 60 yd
Call for Custom Converting and Slitting.

Product: PROTEX 223-5ht

In Stock Item

Request Quote   Request A Sample

PROTEX 223 Protective Film

Applications

INDUSTRIES: Aerospace

APPLICATION: Surface Protection

APPLICATION DESCRIPTION:

For protection against corrosion and as a moisture barrier for galley and lavatory areas of aircraft. Provides excellent protection as a die-cut mask to aircraft windows during stripping operations. Exhibits good solvent resistance as well as excellent moisture/corrosion barrier properties. Applied to fiber impregnated and aluminum honeycomb core material to hold core material on vacuum table during routing and machining operations.

APPLICATION NOTES:

Application surface: Composite Milling, Moisture Barrier

Request Quote   Request A Sample

Technical Data

BRAND: Mask-Off

MATERIAL DESCRIPTION:

SIZE:48" x 60 yd - Call for Custom Converting and Slitting
COLOR:Refer to Data Sheet
ADHESIVE TYPE:Pressure-Sensitive
CONSTRUCTION:Single Coated
LINER:Flat

TECHNICAL DATA:

ADHESIVE LAYER:Rubber
ADHESIVE LAYER DESCRIPTION:Synthetic elastomer / resin
BACKING/CARRIER MATERIAL:Film
THICKNESS:5 mil
ADHESION TO STEEL:oz/inch width 12-15 (-2/+2.5) (At time of manufacture) PSTC-1 (Modified)
TENSILE STRENGTH:PSI/mil 30,000
ELONGATION:% M.D.60-110

DATA SHEET:

PDF download PROTEX 223-5ht, Protective Film (PDF)

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote   Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.