• Overview
  • Applications
  • Technical Data
  • Warranty

1/2″ x 36 yd. x 62 mil Double-Sided Rubber Adhesive Polyethylene Foam Tape

Double-Sided Polyethylene Foam Tape. Pressure-sensitive foam mounting tape with a highly aggressive synthetic rubber adhesive. 36 yard roll of D/C black or white PE Foam. A conformable closed cell foam with an adhesive that provides high initial adhesion to a variety of surfaces including polyethylene and polypropylene.

3M 4466 Features:

  • Black or white, 0.062 in. (1.6 mm) closed-cell polyethylene foam carrier
  • Offers an ultimate adhesion to a large variety of surfaces
  • Bonds to irregular surfaces due to it’s high conformability
  • Quick stick rubber adhesive
  • Adheres well to most low surface energy (LSE) materials

3M 4466 Recommended Application

  • Indoor general purpose mounting and joining
  • Decorative trim
  • Nameplate mounting
  • Point-of-purchase displays and signs

Custom Sizes Available, Additional Color Available

For custom sizes, please call 800-643-5996 or Request a Quote. Available colors include Black and White.

Request Quote   Request A Sample

Working On A Prototype?

Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.

Request a Prototype

Applications

APPLICATION DESCRIPTION:

Instead of mechanical fasteners such as screws, bolts and studs, 3M 4466 double coated polyethylene tape leaves no puncture holes. 3M 4466 double coated tape offers speed, strength and improved aesthetics to your mounting application. 4466 can be easily applied by hand or with a dispenser, with no special application equipment required. Immediate holding strength. Further improved upon the power of liquid adhesives.

APPLICATION NOTES:

Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or water. Note: Be sure to follow the manufacturer™s precautions and directions for use when using cleaning solvents. Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.

Request Quote   Request A Sample

Technical Data

BRAND: 3M

MATERIAL DESCRIPTION:

SIZE:1/2" x 36 yd.
COLOR:Black
COLOR:White
ADHESIVE TYPE:Pressure-Sensitive
CONSTRUCTION:Double Sided
RELEASE LINER MATERIAL:3 mil (0.08 mm) Tan Paper
RELEASE LINER THICKNESS:3 mil (0.08 mm)

TECHNICAL DATA:

ADHESIVE LAYER:Rubber
ADHESIVE LAYER DESCRIPTION:Rubber
BACKING/CARRIER MATERIAL:Polypropylene Film
BACKING/ADHESIVE THICKNESS:N/A
ADHESION TO STEEL:8 lb/inch width (140 N/100mm)
TENSILE STRENGTH:40 lb./in.2 (275 kPa)
ELONGATION:N/A

DATA SHEET:

PDF download 1/2″ x 36 yd. x 62 mil Double-Sided Rubber Adhesive Polyethylene Foam Tape (PDF)

SHELF LIFE:

Typical shelf life is one (1) year from date of manufacture (DOM).

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote   Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.