- Technical Data
3M VHB Adhesive Tapes
24″ x 60 yd.|180 yd. x 9.2 mil Clear 3M VHB Adhesive Transfer Tape
3M™ VHB Adhesive Transfer Tape F9469PC is a 5.0 mil 100MP high performance acrylic with 4.2 mil 58 lb polycoated kraft paper liner – unprinted. 3M High Performance Acrylic Adhesive 100MP, which has excellent long term holding power with much higher adhesion strength than typical pressure sensitive adhesive systems. These 3M VHB Adhesive Transfer Tapes are transparent and are ideal for use in many interior and exterior industrial applications to replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
- 5.0 mil high performance industrial joining and metal fabrication
- Excellent long-term holding power with higher adhesion strength than typical PSAs
- Transparent and ideal for use in many interior and exterior industrial applications to replace rivets, spot welds, liquid adhesives and other permanent fasteners
- Aerospace, Appliance, Automotive, Circuit Board to Rigidizer Attachment, Electronics, Flexible Circuit Attachment, Flexible Heater Attachment, General Industrial Assembly, Graphic Attachment, Industrial, Metal Fabrication, Nameplate Attachment, Solar, Transportation
- For adhering, affixing, assembling, attaching, bonding, converting, cushioning, fastening, fixturing, gasketing, gluing, holding, identifying, ingress protecting, insulating, isolating, joining, labeling, laminating, marking, mounting, processing, sealing, securing, spacing, splicing, sticking, taping, and more.
Custom Sizes Available
For custom sizes, please call 800-643-5996 or Request a Quote.
Working On A Prototype?
Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.
ApplicationsINDUSTRY: Converter Solutions, Automotive, Construction, Oil and Gas, Signage, Transportation, Specialty Vehicle, Metalworking, Medical, General Industrial, Military & Government, Appliance, MRO, Electronics, Aerospace, Woodworking
INDUSTRIES: Appliance and Housing
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol/water mixture or heptane.*Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.*Note: Be sure to follow the manufacturer™s precautions and directions for use when using solvents.
APPLICATION NOTES:3M Adhesive 100MP is thermoplastic in nature, becoming softer as temperature increases and firmer as temperature decreases. As theFigure 1. T-Peel Performance vs. Temperature(3MTM VHBTM Adhesive Transfer Tape F9473PC on Aluminum)10090Break Away Peeladhesive becomes firmer, theperformance generally increases.
Technical DataBRAND: 3M
|SIZE:||24" x 60 yd.|180 yd.|
|LINER:||Tan 58# Polycoated Kraft Paper (PCK)|
|ADHESIVE LAYER DESCRIPTION:||3M 100MP High Temperature Acrylic Adhesive (VHB)|
|THICKNESS:||2.3 mil Face-Side Adhesive Thickness|
|TOTAL THICKNESS:||9.2 mil|
SHELF LIFE:Store at room temperature conditions of 70°F (21°C) and 50% relative humidity. If stored properly, product retains its performance and properties for 18 months from date of shipment. If the products have been exposed to severe weather conditions, we suggest to precondition the products at the above storage conditions for at least 24 hours before using them.
Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.
The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.