3/4″ x 18 yd.|36 yd. x 5 mil Clear Scotch ATG 300 Acrylic Adhesive Transfer Tape

Scotch® ATG Adhesive Transfer Tape 969 is a 300 acrylic, reverse wound, pressure sensitive adhesive on a densified kraft paper liner. High tack adhesive transfer tape. For use with Scotch® ATG Adhesive Applicators.
A soft pressure sensitive adhesive system that features high initial adhesion and good holding power.

A soft pressure sensitive adhesive system that features high initial adhesion and good holding power.
Delivers a controlled application of the adhesive while the liner rewinds into the ATG applicator.
Bonds on contact, and works on a variety of substrate or material combinations.
Versatile, convenient, quick and easy to use.
No mess or clean up.
Cost effective replacement to rivets, staples, screws, bolts, liquid adhesives.
Safer than hot melt adhesives.

Custom Sizes Available

For custom sizes, please call 800-643-5996 or Request a Quote.

Request Quote Request A Sample

Working On A Prototype?

Have a sketch or drawing but you're not sure where to go next?
Our professional staff will provide guidance on the best materials and process to turn your idea into a profitable venture.

Request a Prototype

Applications

INDUSTRIES: Appliance and Housing

INDUSTRIES: Graphics

INDUSTRIES: Industrial

INDUSTRIES: Signage

APPLICATION: Transfer

APPLICATION DESCRIPTION:

Bond strength is dependent upon the amount of adhesive-to-surface contactdeveloped. Firm application pressure helps develop better adhesive contact andimprove bond strength.To obtain optimum adhesion, the bonding surfaces must be clean, dry and wellunified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbingalcohol) or heptane. Note: Be sure to follow the manufacturer™s precautions anddirections for use when using solvents.Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initialtape application to surfaces at temperatures below 50°F (10°C) is not recommendedbecause the adhesive becomes too firm to adhere readily. However, once properlyapplied, low temperature holding is generally satisfactory.

APPLICATION NOTES:

Application Ideas: Tapes 969 and 976 are ideal forbonding materials with glossycoatings where an aggressiveadhesive with high initial adhesion isdesired. Some application ideas are:Folders and boxesAttach fabric swatches in samplebooksAssemble point-of-purchasedisplays

Request Quote Request A Sample

Technical Data

BRAND: 3M

MATERIAL DESCRIPTION:

SIZE:	3/4" x 18 yd.\|36 yd.
COLOR:	Clear
ADHESIVE TYPE:	Pressure-Sensitive
CONSTRUCTION:	Double Sided
CONSTRUCTION:	Transfer
RELEASE LINER MATERIAL:	Densified Kraft Tan Paper
RELEASE LINER THICKNESS:	4 mil (0.10 mm)

TECHNICAL DATA:

ADHESIVE LAYER:	Acrylic
ADHESIVE LAYER DESCRIPTION:	3M 300 is a soft acrylic
BACKING/CARRIER MATERIAL:	None
THICKNESS:	5 mil (0.13 mm) thick high-tack
ADHESION TO STEEL:	75 oz./in. (82 N/100 mm) (ASTM D3330)

DATA SHEET:

3/4″ x 18 yd.|36 yd. x 5 mil Clear Scotch ATG 300 Acrylic Adhesive Transfer Tape (PDF)

SHELF LIFE:

Tape in Roll Form: 24 months from date of manufacture when stored in original cartons at 70°F (21°C) and 50% relative humidity.

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.