• Overview
  • Applications
  • Technical Data
  • Warranty

3M 4016 Double Coated Urethane Foam Tape, 36 yd

Urethane Foam Tape

3M 4016 Double Coated Foam Tape with 3M 100 Acrylic Adhesive

3M Double Coated Urethane Foam Tape 4016 is a thick, double-coated open-cell urethane foam tape with a 62 lb. densified kraft paper liner and is ideal for applications such as mounting interior signage and nameplates. Its 62 mil foam provides handling convenience and cushioning. 3M™ Double Coated Urethane Foam Tapes are a family of tapes that are conformable foams offering high shear strength and are available with either a high temperature holding acrylic adhesive system or a rubber adhesive system for bonding to various types of surfaces for mounting, joining and holding.

  • High shear strength on metal and high surface energy plastics
  • Durable foam is ideal for interior mounting applications
  • Off-white color provides a clean appearance
  • Ideal for bonding, attaching and mounting
  • Thick foam dampens and prevents vibration and open-cell structure aids component cooling

Available Sizes:
1/4 inch
3/8 inch
1/2 inch
3/4 inch
1 inch
1.5 inch
2 inch
Call for Custom Converting and Slitting.

 

Product: 70002481060

In Stock Item

Request Quote   Request A Sample

3M 4016 Double Coated Urethane Foam Tape

Applications

INDUSTRIES: Industrial

APPLICATION: Bonding

APPLICATION DESCRIPTION:

Bonds surfaces and provides handling convenience and cushioning. The urethane foam tapes are generally ideal for interior applications or for exterior applications where the tape will be protected from the environment. The urethane foam is open cell.

APPLICATION NOTES:

Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol* and water (rubbing alcohol) or heptane. Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. *Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents.

Request Quote   Request A Sample

Technical Data

BRAND: 3M

MATERIAL DESCRIPTION:

COLOR:Natural
ADHESIVE TYPE:Pressure-Sensitive
CONSTRUCTION:Single Coated
LINER:Green Plaid
RELEASE LINER MATERIAL:0.003 (0.08)

TECHNICAL DATA:

ADHESIVE LAYER:Acrylic
ADHESIVE LAYER DESCRIPTION:3M 100 Acrylic
BACKING/CARRIER MATERIAL:Foam
THICKNESS:0.0625 (1.6) nominal
TENSILE STRENGTH:140 (965) psi (kPa)
ELONGATION:100%

DATA SHEET:

PDF download 3M 4016 Double Coated Urethane Foam Tape, 36 yd (PDF)

SHELF LIFE:

To obtain best performance, use these products within 24 months from date of manufacture except 3M™ Double Coated Urethane Foam Tape 4085 which is 18 months from date of manufacture. Store in original cartons at 70°F (21°C) and 50% relative humidity.

NOTES:

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.

Request Quote   Request A Sample

Warranty

Physical and performance characteristics shown are obtained from tests recommended by vendor. Quality Assurance and Technical Service Departments do not represent a guarantee of product performance. Individual rolls may vary slightly from these averages. The user should determine whether the product is fit for a particular purpose and is suitable for the user's method of application before use.

The information listed above has been obtained from controlled laboratory tests and is reliable, but should not be used for the purpose of writing specifications. It is offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. It is recommended that the prospective user determine the product suitability before adapting for commercial use.